DOUGIE: Two different tyre brands on the front. Owner says they're a matching pair. ELEANOR: What matches? DOUGIE: The price. Both were on special offer. ELEANOR: We need to establish what is actually different. Brand names aren't the size markings. DOUGIE: Read the sizes and identify the structures. Tyres of different sizes on the same axle are a major defect, subject to the permitted size equivalences in the manual. ELEANOR: Some tyres have dual size markings. The manual also allows particular standard aspect-ratio combinations. Check those before deciding two markings mean incompatible sizes. DOUGIE: And radial-ply with cross-ply on the same axle is a major defect. That's different structure. ELEANOR: Steel and fabric radial-ply tyres count as the same structure. DOUGIE: Now suppose one's a run-flat and one's conventional. ELEANOR: The manual permits that combination on the same axle, although it isn't recommended. DOUGIE: Important distinction. "Not recommended" isn't automatically an MOT rejection. Nor does meeting that one point make it a recommendation. ELEANOR: They still need to satisfy all the other applicable checks. DOUGIE: Owner says they've both got plenty of tread. He's brought a photograph. ELEANOR: What does it show? DOUGIE: The tread. Very artistic. Nothing of the cut in the sidewall. ELEANOR: Tread depth doesn't settle tyre condition. Check the tyre itself. DOUGIE: If ply or cord is visible without touching it, fail. If carefully opening a cut reveals exposed ply or cord, fail irrespective of the cut's size. ELEANOR: The manual allows a blunt instrument to open a cut without causing further damage. It also sets a separate size criterion where cords can be felt but not seen. DOUGIE: We use that criterion when it applies. We don't turn "I can feel something" into a guess about cords. ELEANOR: If you're unsure whether it's cords rather than a foreign object, the manual says pass and advise. DOUGIE: And assess a lump properly. Normal manufacturing undulations aren't the same as a bulge caused by structural deterioration. ELEANOR: A lump, bulge or tear caused by separation or partial failure of the structure is a dangerous defect. DOUGIE: So here's what we do. Read the markings. Apply the size and structure rules. Inspect the actual condition. ELEANOR: Describe the defect you find. Don't just write "odd tyres". DOUGIE: That's what the owner called them. Then he asked if turning the wheels straight would help them match. ELEANOR: One question. A run-flat and a conventional tyre share an axle. Is that combination, by itself, an MOT reason for rejection?