DOUGIE: I've found the analyser's daily leak-check record. ELEANOR: Where was it? DOUGIE: Behind a sticker saying “Keep clear”. ELEANOR: Clear instructions. Imaginative filing. DOUGIE: Before the probe goes in, we establish that the equipment and vehicle are ready. The printout isn't more reliable because it has a logo. ELEANOR: Appendix two says the user should make a daily leak check of the exhaust-gas analyser hose and probe. Most machines have an automatic facility. DOUGIE: If ours doesn't, we physically check the hose and probe for leaks. An automatic calendar reminder isn't an automatic leak test. ELEANOR: The basic emissions procedure also requires that the daily leak test has been carried out. Then the engine must be hot and the appropriate checks completed. DOUGIE: That includes the hydrocarbon hang-up check. The basic test requires a reading below twenty parts per million before the probe is inserted. ELEANOR: Residual contamination can give you a misleading starting point. We want a measurement of this exhaust, not an exciting compilation of previous customers. DOUGIE: Follow the selected procedure's engine-temperature, speed and sampling requirements. Don't borrow a preparation step from another test because the buttons look familiar. ELEANOR: A diesel smoke test starts with an especially important question: is the engine safe to test? DOUGIE: Ask the presenter and make the brief examination. Insufficient oil, low oil pressure, abnormal engine noise, a tampered governor or an unsatisfactory camshaft belt are reasons not to conduct the smoke test. ELEANOR: The manual requires the reason on the V T thirty where you judge the smoke test unsafe. We don't rev it to see whether our concern was justified. DOUGIE: That's diagnosis by expensive noise. We already have enough of that in the radio adverts. ELEANOR: For the instrumented diesel procedure, check the prescribed temperature condition, and remove any oil-temperature probe before accelerating the engine. DOUGIE: And follow the meter prompts and manufacturer information where needed, particularly with automatic transmissions. Avoid unnecessary acceleration or prolonged high revving. ELEANOR: The smoke meter has its own equipment schedule. The user should check it every week; calibration is every twelve months by a technician accredited by the United Kingdom Accreditation Service. DOUGIE: The gas analyser's calibration interval depends on its make or type: three, six or twelve months, through the specified recognised technician and procedure. ELEANOR: So a weekly smoke-meter check isn't an annual calibration. And “the engineer was here recently” isn't a date. DOUGIE: Here's what we do. Find the actual records, check the relevant due dates, complete the user checks and prepare the vehicle for the right procedure. Then take the measurement. ELEANOR: Where mandatory equipment is overdue for calibration, testing which uses it must stop until it's recalibrated. DOUGIE: I'll move the leak-check record somewhere visible. ELEANOR: Try under the sticker. It appears to be a protected habitat.