Getting started · 2 min · 0
How this works
How to use the series towards your annual training: pick a topic, listen, try the situations and check the guidance. Why a few short episodes are not three hours, and what the series does not do for you.

MOTGuard podcast
Short conversations covering the annual training topics for MOT testers. With Dougie and Eleanor. Pick a topic, follow the series, or take a story break.
40 episodes · 106 minutes of audio
Getting started · 2 min · 0
How to use the series towards your annual training: pick a topic, listen, try the situations and check the guidance. Why a few short episodes are not three hours, and what the series does not do for you.
Getting started · 3 min · 31
The last episode: turning what you have covered into a proper training record. Recording real time and real learning, entering it on the MOT testing service, and why the annual assessment is a separate job.
Lighting · 4 min · 1.1
Front fog lamps that have never worked: pass or fail? Why the first-use date decides whether they are inspected at all, and what changes for newer cars and for rear fog lamps.
Lighting · 3 min · 1.2
Before judging where a headlamp beam lands, identify its type. European and British American patterns are checked on different beams against different diagrams, and a flat top is not automatically a defect.
Lighting · 3 min · 1.3
An unpopular headlamp result is not proof the equipment is wrong. What makes an aim check valid: the standing area, equipment alignment, the correct lamp pocket, the levelling control and the suspension.
Lighting · 3 min · 1.4
Which aim limits apply depends on the height of the headlamp centre. A worked European dipped-beam example either side of 850 mm, and why one acceptable measurement is not a complete result.
Lighting · 3 min · 1.5
LED bulbs fitted in halogen headlamp units: when an approved replacement source is acceptable, what the approval sticker must show, and why a complete LED headlamp unit is a different question.
Lighting · 3 min · 1.6
Modern lamp units do several jobs at once. Why a daytime running lamp may switch off beside a flashing indicator, what colour that indicator must show, and how to judge each function on its own rules.
Tester responsibilities · 4 min · 2.1
Refuse and decline are different decisions with different grounds. A van too loaded to inspect and a lowered car that will not go on the hoist show which applies, and when an obstacle can simply be removed.
Tester responsibilities · 3 min · 2.2
When a test cannot be finished, the reason decides whether you abort or abandon, and whether a fee may be charged. Why finding a defect is not in itself a reason to stop, and why damage is a separate matter.
Tester responsibilities · 3 min · 2.3
Three duties that are easy to blur: keeping your MOT testing service profile current, holding the driving entitlement a road test needs, and notifying a relevant conviction to DVSA and your authorised examiner.
Tester responsibilities · 3 min · 2.4
A full diary does not decide whether a tester is fit to test. What the testing guide says about medication, recovery from illness, stress and alcohol, and why telling the station early is part of the job.
Tester responsibilities · 3 min · 2.5
Working notes are not the training log. What a useful entry on the MOT testing service records, when entries can be made, who is responsible for them, and how long older records must be kept.
Tester responsibilities · 3 min · 2.6
A regular customer wants a favourable result because you know him. Making your own testing decisions, keeping records truthful, protecting your sign-in, and what the fast-track disciplinary process requires.
Brakes · 3 min · 3.1
The dashboard says the brake pads are worn but the inner pads cannot be seen. Why the published answer is pass and advise, and how the decision changes once a worn pad or disc is actually visible.
Brakes · 3 min · 3.2
Brake pipes and flexible hoses are judged on different criteria. How to assess corrosion without damaging the coating, when the benefit of the doubt applies, and why the type of leak and system matter.
Brakes · 3 min · 3.3
The parking brake holds but the cable has broken strands. Why a satisfactory performance test does not cancel a component defect, and how to describe what is wrong with the cable, linkage or lever.
Brakes · 3 min · 3.4
A small brake fluid leak and a soft pedal. Why the leaking component and its effect decide the category, how reserve travel and fluid level are checked, and what changes on brake-by-wire systems.
Brakes · 3 min · 3.5
Four-wheel drive and an electronic parking brake on one car. How to choose the brake test method for each system, when rollers, a decelerometer or a gradient test apply, and why the testing advice comes first.
Brakes · 3 min · 3.6
A pickup sold as a lifestyle vehicle. How the dual-purpose definition, test weight and vehicle category each shape the brake test, and why class, category, weight and method are separate questions.
Tyres and suspension · 3 min · 4.1
A worked tread depth example for an ordinary car: 1.6 mm in the primary grooves, across the central three-quarters, all the way round. What counts as a primary groove, and why depth is not the whole tyre check.
Tyres and suspension · 3 min · 4.2
Two different tyres on one axle. Which differences in size and structure are defects, how a run-flat beside a conventional tyre is treated, and how cuts, cords and bulges are assessed.
Tyres and suspension · 3 min · 4.3
Not all suspension movement is wear. How bushes and strut tops are designed to move, why the jacking method matters, and where the spring pin limits apply and where they do not.
Tyres and suspension · 3 min · 4.4
A split dust cover on a ball joint. Why the joint and its cover are separate findings, how to tell a severely deteriorated cover from one that no longer keeps dirt out, and which category each carries.
Tyres and suspension · 3 min · 4.5
The knocking has stopped because the anti-roll bar link has fractured. How to work through the bar, links, joints, bushes and mountings, and why a quiet component is not a sound one.
Tyres and suspension · 3 min · 4.6
A freshly painted subframe still has to be inspected. Component, attachment and supporting structure are three questions, and the 30 cm prescribed area locates the assessment rather than making it for you.
Emissions · 3 min · 5.1
Before the analyser comes out, identify the vehicle: fuel, first-use date and special cases. How hybrids, early catalyst cars, conversions and the engine malfunction lamp change the emissions route.
Emissions · 3 min · 5.2
A home-built kit car with no emissions limits on the V5C and no match in the database. How first use, the approval test and the engine fitted at approval decide the test, using this year's published example.
Emissions · 3 min · 5.3
A replacement engine older than the car. How the first-use date decides whether the emissions standard follows the engine or the vehicle, and why proof of the engine's age matters.
Emissions · 3 min · 5.4
The analyser database lists three versions of the car and none is the one outside. How to find specific limits for a full catalyst test, when default limits apply, and what a partial match allows.
Emissions · 4 min · 5.5
The diesel smoke test in order: when it applies, finding the plate value and entering it with the current tolerance, how the acceleration readings are judged, and the visual check where a particulate filter is fitted.
Emissions · 3 min · 5.6
Checks that come before any emissions reading: the analyser's daily leak check, the hydrocarbon hang-up check, whether a diesel engine is safe to test, and the calibration dates that stop testing if missed.
Recap · 3 min · R1
A recap of a topic from last year's syllabus. A hybrid arrives with a damaged, leaking propulsion battery: what the manual tells you to do, and how to work safely around high-voltage components.
Recap · 3 min · R2
A recap of a topic from last year's syllabus. When a disabled driver's adapted controls are testable items, when you still report a defect to the presenter, and the conditions for a road test.
Station management · 3 min · B1
Every tester's work should be checked by someone else, including the owner's. How a sole tester can arrange quality control checks, how often they are needed, and what a useful record of one contains.
Station management · 4 min · B2
A user check is not a calibration, and each piece of equipment has its own interval. The gas analyser, smoke meter, brake and headlamp testers and decelerometer, and the records you need to keep.
Station management · 3 min · B3
What a red, amber or green station risk rating does and does not tell you, how to use test quality information, who can see a tester's own rating, and what to expect from a DVSA site review.
Story breaks · 2 min · S1
A story break. A customer hands over the keys and says there is nothing Dougie needs to know. It turns out there was one thing worth mentioning before he opened the door.
Story breaks · 2 min · S2
A story break. A very polite man in reception reads every notice on the wall, asks precise questions and takes a photograph. Dougie draws a conclusion and starts straightening the leaflets.
Story breaks · 2 min · S3
A story break. Dougie and Eleanor improve the waiting room with better chairs, proper cups and a menu. The customer feedback is glowing, though not quite about what they expected.
Try another word or browse the full series.