In the Bay with Dougie and Eleanor, in conversation.

MOTGuard · In the Bay

Before the probe goes in

Emissions · 3 min · With Dougie and Eleanor

Listen to this episode

Download audio · Download transcript · Podcast feed

All 40 episodes — choose another
  1. How this works · 2 min
  2. Fog lamps that do not work · 4 min
  3. The extra passenger · 2 min
  4. Reading the beam · 3 min
  5. Before you blame the car · 3 min
  6. Headlamp aim · 3 min
  7. The LED upgrade · 3 min
  8. One lamp, two jobs · 3 min
  9. Refuse or decline? · 4 min
  10. Stopping a test you started · 3 min
  11. Your licence, your name, your record · 3 min
  12. Not fit to test today · 3 min
  13. The log nobody filled in · 3 min
  14. The man reading the notices · 2 min
  15. When it goes wrong · 3 min
  16. The pads you can't see · 3 min
  17. Pipes and hoses · 3 min
  18. Cables, rods and levers · 3 min
  19. Hydraulics · 3 min
  20. Electric parking brakes and four-wheel drive · 3 min
  21. Which test for which vehicle · 3 min
  22. Tread depth · 3 min
  23. Condition, size and type · 3 min
  24. Play you can feel · 3 min
  25. Compliments to the mechanic · 2 min
  26. Ball joints and dust covers · 3 min
  27. Anti-roll bars · 3 min
  28. Subframes · 3 min
  29. Which test applies · 3 min
  30. The kit car · 3 min
  31. A different engine · 3 min
  32. When the book is blank · 3 min
  33. Smoke testing · 4 min
  34. Before the probe goes in · 3 min
  35. The hybrid with a leaking battery · 3 min
  36. Hand controls and the road test · 3 min
  37. You're done. Now what? · 3 min
  38. The quality-control check, including your own · 3 min
  39. Calibration, checks and the certificates · 4 min
  40. Your risk rating and a site review · 3 min

Transcript

DOUGIE: I've found the analyser's daily leak-check record.

ELEANOR: Where was it?

DOUGIE: Behind a sticker saying “Keep clear”.

ELEANOR: Clear instructions. Imaginative filing.

DOUGIE: Before the probe goes in, we establish that the equipment and vehicle are ready. The printout isn't more reliable because it has a logo.

ELEANOR: Appendix two says the user should make a daily leak check of the exhaust-gas analyser hose and probe. Most machines have an automatic facility.

DOUGIE: If ours doesn't, we physically check the hose and probe for leaks. An automatic calendar reminder isn't an automatic leak test.

ELEANOR: The basic emissions procedure also requires that the daily leak test has been carried out. Then the engine must be hot and the appropriate checks completed.

DOUGIE: That includes the hydrocarbon hang-up check. The basic test requires a reading below twenty parts per million before the probe is inserted.

ELEANOR: Residual contamination can give you a misleading starting point. We want a measurement of this exhaust, not an exciting compilation of previous customers.

DOUGIE: Follow the selected procedure's engine-temperature, speed and sampling requirements. Don't borrow a preparation step from another test because the buttons look familiar.

ELEANOR: A diesel smoke test starts with an especially important question: is the engine safe to test?

DOUGIE: Ask the presenter and make the brief examination. Insufficient oil, low oil pressure, abnormal engine noise, a tampered governor or an unsatisfactory camshaft belt are reasons not to conduct the smoke test.

ELEANOR: The manual requires the reason on the V T thirty where you judge the smoke test unsafe. We don't rev it to see whether our concern was justified.

DOUGIE: That's diagnosis by expensive noise. We already have enough of that in the radio adverts.

ELEANOR: For the instrumented diesel procedure, check the prescribed temperature condition, and remove any oil-temperature probe before accelerating the engine.

DOUGIE: And follow the meter prompts and manufacturer information where needed, particularly with automatic transmissions. Avoid unnecessary acceleration or prolonged high revving.

ELEANOR: The smoke meter has its own equipment schedule. The user should check it every week; calibration is every twelve months by a technician accredited by the United Kingdom Accreditation Service.

DOUGIE: The gas analyser's calibration interval depends on its make or type: three, six or twelve months, through the specified recognised technician and procedure.

ELEANOR: So a weekly smoke-meter check isn't an annual calibration. And “the engineer was here recently” isn't a date.

DOUGIE: Here's what we do. Find the actual records, check the relevant due dates, complete the user checks and prepare the vehicle for the right procedure. Then take the measurement.

ELEANOR: Where mandatory equipment is overdue for calibration, testing which uses it must stop until it's recalibrated.

DOUGIE: I'll move the leak-check record somewhere visible.

ELEANOR: Try under the sticker. It appears to be a protected habitat.

Sources

Source snapshot for this release, published 14/11/2026.

← Back to all episodes