
MOTGuard · In the Bay
Stopping a test you started
Tester responsibilities · 3 min · With Dougie and Eleanor
Listen to this episode
All 40 episodes — choose another
- How this works
- Fog lamps that do not work
- The extra passenger
- Reading the beam
- Before you blame the car
- Headlamp aim
- The LED upgrade
- One lamp, two jobs
- Refuse or decline?
- Stopping a test you started
- Your licence, your name, your record
- Not fit to test today
- The log nobody filled in
- The man reading the notices
- When it goes wrong
- The pads you can't see
- Pipes and hoses
- Cables, rods and levers
- Hydraulics
- Electric parking brakes and four-wheel drive
- Which test for which vehicle
- Tread depth
- Condition, size and type
- Play you can feel
- Compliments to the mechanic
- Ball joints and dust covers
- Anti-roll bars
- Subframes
- Which test applies
- The kit car
- A different engine
- When the book is blank
- Smoke testing
- Before the probe goes in
- The hybrid with a leaking battery
- Hand controls and the road test
- You're done. Now what?
- The quality-control check, including your own
- Calibration, checks and the certificates
- Your risk rating and a site review
Transcript
ELEANOR: The brake tester has stopped displaying readings. It's still lit up, though. Apparently we're paying for atmosphere. DOUGIE: It can set a mood on its own time. Equipment problem, cannot complete the test. We're stopping. Abort. ELEANOR: That answers the question at the end of our refusal episode. In the inspection manual, abort means the test cannot be completed because of a problem with the equipment or the tester. DOUGIE: And no fee may be charged for that test. A machine having a bad morning isn't the customer's purchase. ELEANOR: Now change the situation. The equipment works, but something discovered on the vehicle makes it unsafe to continue. DOUGIE: That's where we look at abandon. Or where an item cannot be satisfactorily inspected. The reason matters, not which word we usually shout across the workshop. ELEANOR: The manual says an appropriate fee may be charged for an abandoned test. May, not automatically must. DOUGIE: We also need to avoid abandoning a perfectly ordinary failure. A defect doesn't always prevent us finishing the examination. ELEANOR: Exactly. If the vehicle can still be properly and safely examined, finding a defect isn't itself a reason to stop inspecting. DOUGIE: We identify the defect, apply the relevant manual criteria and decide whether the examination can continue. We don't replace the rest of the test with an expression of disappointment. ELEANOR: You have a very comprehensive expression of disappointment. DOUGIE: Covers most makes. Now, halfway through, a component breaks. First thing is to make the situation safe. Then establish what happened and whether we can finish properly. ELEANOR: A component breaking does not magically turn the vehicle into faulty test equipment. We use the actual reason the test cannot continue. DOUGIE: And we don't decide liability by picking whichever test outcome sounds cheaper. ELEANOR: Liability for loss or damage is dealt with separately in testing guide appendix four. It depends on the circumstances. The guide itself warns that its explanation isn't a definitive legal interpretation. DOUGIE: So we explain the facts to the presenter. We don't announce, 'It's an MOT, so nothing is ever our responsibility.' ELEANOR: Nor do we settle a legal question with the brake tester. It has enough trouble displaying numbers. DOUGIE: Here's what we do. Stop safely when necessary. Establish whether the obstacle is the equipment, the tester, or completing the vehicle examination safely and properly. ELEANOR: Apply the relevant manual wording. Explain the reason and the fee position correctly. Deal with any damage as its own issue. DOUGIE: Abort isn't a more dramatic way to say abandon. ELEANOR: And neither is a repair estimate.