
MOTGuard · In the Bay
Hand controls and the road test
Recap · 3 min · With Dougie and Eleanor
Listen to this episode
All 40 episodes — choose another
- How this works
- Fog lamps that do not work
- The extra passenger
- Reading the beam
- Before you blame the car
- Headlamp aim
- The LED upgrade
- One lamp, two jobs
- Refuse or decline?
- Stopping a test you started
- Your licence, your name, your record
- Not fit to test today
- The log nobody filled in
- The man reading the notices
- When it goes wrong
- The pads you can't see
- Pipes and hoses
- Cables, rods and levers
- Hydraulics
- Electric parking brakes and four-wheel drive
- Which test for which vehicle
- Tread depth
- Condition, size and type
- Play you can feel
- Compliments to the mechanic
- Ball joints and dust covers
- Anti-roll bars
- Subframes
- Which test applies
- The kit car
- A different engine
- When the book is blank
- Smoke testing
- Before the probe goes in
- The hybrid with a leaking battery
- Hand controls and the road test
- You're done. Now what?
- The quality-control check, including your own
- Calibration, checks and the certificates
- Your risk rating and a site review
Transcript
ELEANOR: The customer has offered to explain the adapted controls before you move the car. DOUGIE: Good. I'll listen. ELEANOR: That was unexpectedly efficient. I had prepared a substantial speech about the danger of pretending to understand things. DOUGIE: Save it. You'll need it when I programme the office printer. ELEANOR: That machine has already endured enough experimental leadership. DOUGIE: Adapted controls are a familiar part of the work. The useful question is what the fitment does to the standard equipment. ELEANOR: This recaps a subject from the twenty twenty-five to twenty-six syllabus. We use the current manual for the actual inspection. DOUGIE: If the disabled driver's controls are additional, and they don't adversely affect the standard vehicle equipment, those additional controls aren't testable items. ELEANOR: But if you see a defect in that equipment, report it to the presenter. "Not a testable item" doesn't mean "say nothing". DOUGIE: And if the fitment replaces or affects standard controls, test it in the normal way. Record defects in the normal way. ELEANOR: That's the distinction. Not whether the fitment looks unfamiliar, nor whether its owner explains it confidently. DOUGIE: I might know the inspection rules and still need the operation explained. Those are different kinds of knowledge. ELEANOR: A useful distinction for a man who once asked the printer to negotiate. DOUGIE: It responded to calm authority. Eventually. ELEANOR: It had run out of paper. DOUGIE: Back to the car. The statutory MOT doesn't specifically include a road test. One is permitted if we think it's necessary to check the inspection results. ELEANOR: And the tester must be properly licensed to drive it, and ensure the vehicle is in a safe condition for the road test. DOUGIE: So we're not taking every adapted car round the block as a special ritual. Nor are we going out to discover which control does what. ELEANOR: Getting an explanation is sensible preparation. It isn't a substitute for those licence and safety conditions. DOUGIE: Same with jacking. Take care to avoid damage and refer to manufacturer information if available. A modification is a reason to understand the vehicle, not to guess harder. ELEANOR: Vehicles modified for disabled use are assessed on their merits. We don't manufacture a failure simply because the arrangement differs from the one next door. DOUGIE: Here's what we do. Establish whether the extra equipment leaves standard controls unaffected, or replaces or affects them. Apply the right inspection rule. ELEANOR: Report a seen defect even where the additional equipment isn't testable. If a road test is necessary, meet its conditions before moving off. DOUGIE: Treat the person as someone who knows their own controls. Treat our own confidence as something requiring evidence. ELEANOR: Particularly near a printer.