
MOTGuard · In the Bay
The pads you can't see
Brakes · 3 min · With Dougie and Eleanor
Listen to this episode
All 40 episodes — choose another
- How this works
- Fog lamps that do not work
- The extra passenger
- Reading the beam
- Before you blame the car
- Headlamp aim
- The LED upgrade
- One lamp, two jobs
- Refuse or decline?
- Stopping a test you started
- Your licence, your name, your record
- Not fit to test today
- The log nobody filled in
- The man reading the notices
- When it goes wrong
- The pads you can't see
- Pipes and hoses
- Cables, rods and levers
- Hydraulics
- Electric parking brakes and four-wheel drive
- Which test for which vehicle
- Tread depth
- Condition, size and type
- Play you can feel
- Compliments to the mechanic
- Ball joints and dust covers
- Anti-roll bars
- Subframes
- Which test applies
- The kit car
- A different engine
- When the book is blank
- Smoke testing
- Before the probe goes in
- The hybrid with a leaking battery
- Hand controls and the road test
- You're done. Now what?
- The quality-control check, including your own
- Calibration, checks and the certificates
- Your risk rating and a site review
Transcript
DOUGIE: The dashboard says the pads are worn. The owner says they're fine. At least one of them has had a look. ELEANOR: The dashboard has the advantage of arriving with the car. DOUGIE: Our example is a twenty-seventeen class four M one car. Wear indicator illuminated. We can't see the inner front pads. The other pads are satisfactory. ELEANOR: That's the situation in the published group B sample question. Its answer is pass and advise. DOUGIE: Not remove the front wheels. Not invent a thickness for the pads we can't see. ELEANOR: And not fail it simply because the brake wear indicator is lit. Section one point one point thirteen says that isn't a reason for failure. DOUGIE: Which doesn't mean we ignore the brakes. We inspect what the test permits us to inspect. The MOT is carried out without dismantling. ELEANOR: A warning gives us information. It doesn't supply a photograph of an inaccessible pad. DOUGIE: The owner has supplied a photograph. Of the car on his drive. ELEANOR: Lovely. The brake pads will want their own photographer. DOUGIE: Now change the facts. We can see a pad, and it's worn down to its wear indicator. That's a major defect. ELEANOR: Below one point five millimetres is dangerous. Those are findings about the pad, rather than a dashboard message. DOUGIE: We keep those distinctions separate. Otherwise a light can fail a sound component, while a bad component gets waved through because the light's off. ELEANOR: The component does not become satisfactory by declining to make an announcement. DOUGIE: Same care with a disc. The manual says it must be significantly worn before we reject it. Below the manufacturer's recommended limit isn't a reason in itself. ELEANOR: But a significantly and obviously worn disc or drum is a major defect. An insecure or fractured one, or one otherwise likely to fail, is dangerous. DOUGIE: We're not setting up a contest between our eyes and a manufacturer's service advice. We're applying the MOT criteria to what we actually find. ELEANOR: A service recommendation and an MOT rejection criterion can be different things. Explain that without making either sound optional. DOUGIE: Here's what we do. Carry out the permitted inspection. Record the observed defect against the right criterion. Make the limitation and advice clear where the published example calls for it. ELEANOR: And keep the example's conditions. We haven't said every car with a wear warning passes, regardless of anything else wrong with it. DOUGIE: The lamp tells a story. The owner tells a story. We still have to inspect the car. ELEANOR: The photograph can stay in reception.