
MOTGuard · In the Bay
Subframes
Tyres and suspension · 3 min · With Dougie and Eleanor
Listen to this episode
All 40 episodes — choose another
- How this works
- Fog lamps that do not work
- The extra passenger
- Reading the beam
- Before you blame the car
- Headlamp aim
- The LED upgrade
- One lamp, two jobs
- Refuse or decline?
- Stopping a test you started
- Your licence, your name, your record
- Not fit to test today
- The log nobody filled in
- The man reading the notices
- When it goes wrong
- The pads you can't see
- Pipes and hoses
- Cables, rods and levers
- Hydraulics
- Electric parking brakes and four-wheel drive
- Which test for which vehicle
- Tread depth
- Condition, size and type
- Play you can feel
- Compliments to the mechanic
- Ball joints and dust covers
- Anti-roll bars
- Subframes
- Which test applies
- The kit car
- A different engine
- When the book is blank
- Smoke testing
- Before the probe goes in
- The hybrid with a leaking battery
- Hand controls and the road test
- You're done. Now what?
- The quality-control check, including your own
- Calibration, checks and the certificates
- Your risk rating and a site review
Transcript
ELEANOR: The customer has described the subframe as refurbished. DOUGIE: Somebody has painted it. ELEANOR: I see. The refurbishment has reached the colour stage. DOUGIE: Paint isn't the finding, though. We inspect the component and its attachments. Then the vehicle structure supporting those attachments. Three different questions, even when somebody has made them all the same shade of black. ELEANOR: Start by establishing what carries the load. Appendix A explains that corrosion matters through its extent and the function of the affected part, not just its appearance. DOUGIE: A small rotten bit in an important place can matter more than a large ugly patch somewhere else. We need to know the construction, not win a competition for the most dramatic photograph. ELEANOR: For the subframe itself, the suspension-component table lists excessive damage or corrosion as major. A fractured component, or one likely to fail, is dangerous. DOUGIE: Then the mountings and surrounding structure. The prescribed area extends thirty centimetres from any subframe, spring or suspension component mounting, as described in the complete-suspension section. ELEANOR: That is a structural assessment. It is not a rule saying any rust within thirty centimetres is automatically a failure. DOUGIE: Check the strength and continuity of the load-bearing members and the supporting structure or panelling around the mounting. ELEANOR: Significantly reduced strength or continuity, or an inadequate repair in that prescribed area, is major. DOUGIE: If it is so weakened that control of the vehicle is likely to be adversely affected, that's dangerous. ELEANOR: Keep that consequence in the explanation. Thirty centimetres locates the area; it doesn't do the assessing for us. DOUGIE: We use the corrosion guidance. Look first. Finger and thumb pressure to assess the extent. If necessary, carefully scrape or lightly tap the affected area with the corrosion assessment tool. ELEANOR: Lightly. We are establishing its condition, not trying to discover which tool will go through it fastest. DOUGIE: And identify the actual structure. Trim and coatings can make everything look beautifully continuous until you establish what you're looking at. ELEANOR: Appendix A says we don't have to check areas covered by things such as body trim. The inspection is not permission to dismantle the car looking for a more interesting result. DOUGIE: Outside the prescribed area, don't assume the structure stops mattering. Section six gives the main load-bearing structure guidance. ELEANOR: Here's what we do. Component, attachment, supporting structure. Locate the relevant area. Assess the actual weakening or repair. Apply the defect wording and category that fit. DOUGIE: Then explain it clearly. Refurbished isn't a structural material. ELEANOR: Nor, despite today's evidence, is black paint.