
MOTGuard · In the Bay
The LED upgrade
Lighting · 3 min · With Dougie and Eleanor
Listen to this episode
All 40 episodes — choose another
- How this works
- Fog lamps that do not work
- The extra passenger
- Reading the beam
- Before you blame the car
- Headlamp aim
- The LED upgrade
- One lamp, two jobs
- Refuse or decline?
- Stopping a test you started
- Your licence, your name, your record
- Not fit to test today
- The log nobody filled in
- The man reading the notices
- When it goes wrong
- The pads you can't see
- Pipes and hoses
- Cables, rods and levers
- Hydraulics
- Electric parking brakes and four-wheel drive
- Which test for which vehicle
- Tread depth
- Condition, size and type
- Play you can feel
- Compliments to the mechanic
- Ball joints and dust covers
- Anti-roll bars
- Subframes
- Which test applies
- The kit car
- A different engine
- When the book is blank
- Smoke testing
- Before the probe goes in
- The hybrid with a leaking battery
- Hand controls and the road test
- You're done. Now what?
- The quality-control check, including your own
- Calibration, checks and the certificates
- Your risk rating and a site review
Transcript
DOUGIE: Customer's fitted LED bulbs. He's brought the box, the receipt and a five-star review. ELEANOR: What does the review say? DOUGIE: "Arrived Tuesday." Nothing on headlamp compatibility. ELEANOR: What have we actually got fitted? DOUGIE: Ordinary car first used in 2015. Original halogen headlamp units. LED replacement light sources. ELEANOR: So we're checking a replacement light source in a halogen unit. Not a complete replacement headlamp. DOUGIE: And we don't make the decision just by saying "LED". We check whether that replacement source is approved for that lamp. ELEANOR: The current manual allows an approved LED replacement source, supported by the corresponding manufacturer-issued approval sticker. DOUGIE: Permanently affixed to the vehicle and readily visible. Not still in the box. ELEANOR: It must have an anti-counterfeit security feature, such as a hologram, and the specified approval details. DOUGIE: Category designation, rated voltage, ECE approval number and manufacturer's name. We check the actual requirements in section four, not whether the sticker looks expensive. ELEANOR: And it has to correspond with the fitted replacement source. DOUGIE: Owner says they're universal. ELEANOR: The approval is for use in that lamp. DOUGIE: Aye. My reading glasses fit everybody. Doesn't mean everybody can see. ELEANOR: If the required sticker is missing, illegible, damaged, apparently tampered with or doesn't correspond, reject the headlamp for light source and lamp not compatible. DOUGIE: That's a major defect. We're not removing covers or dismantling the lamp to hunt for approval markings. ELEANOR: Correct. The manual doesn't expect us to remove lamp covers, units or light sources for that check. DOUGIE: Now change the example. He's replaced the whole headlamp with a unit manufactured for LED light sources. ELEANOR: Then we mustn't fail it for light source and lamp not compatible just because it uses LEDs. It still has to meet the other applicable lighting requirements. DOUGIE: So "the whole lamp" and "a different bulb in the old lamp" are different questions. ELEANOR: And the date matters. Before first April 1986, light-source compatibility with the headlamp isn't assessed for the MOT. DOUGIE: That isn't permission to ignore the rest of the lighting checks. ELEANOR: Exactly. The date exemption concerns compatibility. DOUGIE: Here's what we do. Establish the first-use date. Identify what's actually been changed. Apply the relevant compatibility and approval requirements, then complete the other lighting checks. ELEANOR: Not an automatic fail for every LED replacement, and not an automatic pass because it lights up. DOUGIE: One to think about. Our 2015 car has LED replacements in halogen units. The owner offers the purchase receipt, but there's no required approval sticker. What decision do we record?