
MOTGuard · In the Bay
Reading the beam
Lighting · 3 min · With Dougie and Eleanor
Listen to this episode
All 40 episodes — choose another
- How this works
- Fog lamps that do not work
- The extra passenger
- Reading the beam
- Before you blame the car
- Headlamp aim
- The LED upgrade
- One lamp, two jobs
- Refuse or decline?
- Stopping a test you started
- Your licence, your name, your record
- Not fit to test today
- The log nobody filled in
- The man reading the notices
- When it goes wrong
- The pads you can't see
- Pipes and hoses
- Cables, rods and levers
- Hydraulics
- Electric parking brakes and four-wheel drive
- Which test for which vehicle
- Tread depth
- Condition, size and type
- Play you can feel
- Compliments to the mechanic
- Ball joints and dust covers
- Anti-roll bars
- Subframes
- Which test applies
- The kit car
- A different engine
- When the book is blank
- Smoke testing
- Before the probe goes in
- The hybrid with a leaking battery
- Hand controls and the road test
- You're done. Now what?
- The quality-control check, including your own
- Calibration, checks and the certificates
- Your risk rating and a site review
Transcript
ELEANOR: The owner describes these as continental headlamps. DOUGIE: The car's been to Calais twice. Apparently the lamps now have qualifications. ELEANOR: We need their beam pattern, not their travel history. DOUGIE: Which means looking at the image and identifying the type before judging where it lands. A neat-looking picture on the screen isn't a result by itself. ELEANOR: The manual gives different diagrams for different headlamps. Some are checked on dipped beam. A particular British American type is checked on main beam. DOUGIE: This is where a familiar routine can lead you astray. You can do the familiar check beautifully and still have chosen the wrong one. ELEANOR: Like my filing system. Correct alphabetical order. Wrong building. DOUGIE: Start with the European type. Its asymmetric dipped beam has a horizontal cut-off on the right, with the wedge of light rising towards the left. The kick-up. ELEANOR: We check that type on dipped beam, using diagram one and its criteria. A flat-top or another alternative dipped pattern can also be acceptable. DOUGIE: Provided the whole upper edge, including any peak, stays inside the appropriate tolerance band. A flat top is not automatically a missing kick-up defect. ELEANOR: And an acceptable mask or converter can remove the rightward kick-up from a right-hand-dip headlamp for temporary use here. DOUGIE: Now look at the British American main-beam type. The identifying main-beam image has that central area of maximum intensity, the hot spot. ELEANOR: Diagram two. It generally has the circular lens marking described in the manual, but don't substitute a remembered marking for checking the actual type and image. DOUGIE: For that type, we judge the hot spot on main beam. We also make sure the brightest part moves downwards when dipped. ELEANOR: There is another British American type checked on dipped beam, with the flat-topped high-intensity area described beside diagram three. Its criteria are different again. DOUGIE: We don't need to recite three diagrams into the workshop. We need to select the right one with the image in front of us. ELEANOR: An excellent use of a diagram. Better than memorising one badly and carrying it round for thirty years. DOUGIE: I carry several things round badly. None of them are the headlamp limits. ELEANOR: Here's the useful question: which part of this image am I assessing, on which beam, and against which diagram? DOUGIE: Set the vehicle and equipment up properly first. Identify the type. Select the beam and diagram. Then judge all the applicable limits. ELEANOR: In the visual activity, choose the diagram before revealing the judgement. The pictures matter; this conversation cannot replace seeing them. DOUGIE: Next episode, we check the equipment setup. Before somebody condemns the continent.