
MOTGuard · In the Bay
Ball joints and dust covers
Tyres and suspension · 3 min · With Dougie and Eleanor
Listen to this episode
All 40 episodes — choose another
- How this works
- Fog lamps that do not work
- The extra passenger
- Reading the beam
- Before you blame the car
- Headlamp aim
- The LED upgrade
- One lamp, two jobs
- Refuse or decline?
- Stopping a test you started
- Your licence, your name, your record
- Not fit to test today
- The log nobody filled in
- The man reading the notices
- When it goes wrong
- The pads you can't see
- Pipes and hoses
- Cables, rods and levers
- Hydraulics
- Electric parking brakes and four-wheel drive
- Which test for which vehicle
- Tread depth
- Condition, size and type
- Play you can feel
- Compliments to the mechanic
- Ball joints and dust covers
- Anti-roll bars
- Subframes
- Which test applies
- The kit car
- A different engine
- When the book is blank
- Smoke testing
- Before the probe goes in
- The hybrid with a leaking battery
- Hand controls and the road test
- You're done. Now what?
- The quality-control check, including your own
- Calibration, checks and the certificates
- Your risk rating and a site review
Transcript
ELEANOR: I have a description from reception. The customer says the ball joint has a cosmetic split. DOUGIE: In the cover? ELEANOR: Presumably. I hope he isn't describing the ball joint as an open-plan design. DOUGIE: Let's look. The joint and its dust cover are separate findings. A sound joint doesn't automatically make a failed cover acceptable. ELEANOR: Nor does a damaged cover prove that the joint is already worn. We inspect both. DOUGIE: First, assess the joint properly. Jack or load the suspension as the manual requires for that design. We may need different positions to remove the spring force and reveal play. ELEANOR: The customer's last test result doesn't establish its condition today. It is useful history, not an inspection by correspondence. DOUGIE: The cover here is missing a piece. Dirt can get in. The joint itself is not excessively worn on our examination. ELEANOR: Then the cover still meets the major-defect wording: missing, or no longer preventing the ingress of dirt and so on. DOUGIE: We don't wave it through because there's no knock. A quiet joint can still have an open door. ELEANOR: And we don't use that major wording for every cover that looks old. The table separately lists a severely deteriorated dust cover as minor. DOUGIE: So ask what we've actually found. Severely deteriorated? Or missing, or no longer keeping dirt out? Those are different descriptions and different categories. ELEANOR: A photograph of a line in the rubber may not settle the question. Examine whether the cover still performs its protective function. DOUGIE: Then back to the joint. Excessively worn is major. Likely to become detached is dangerous. The dust-cover result doesn't put a ceiling on the joint's category. ELEANOR: Nor should we write the same defect twice merely to make the result look thorough. Record the actual applicable findings. DOUGIE: The customer says the new cover is in his boot. ELEANOR: Its protection is currently concentrated on the luggage compartment. DOUGIE: We test what's fitted. Arriving with a part isn't the same as arriving with it fitted. ELEANOR: The practical order is simple. Establish the joint's condition under the correct examination. Establish the cover's condition and whether it prevents dirt entering. Choose the wording that describes each finding. DOUGIE: Then tell the presenter what needs attention, without turning minor, major and dangerous into three words for how annoyed we are. ELEANOR: The cover has one job. Our explanation should make that job clear. DOUGIE: Keep the dirt out. ELEANOR: A role reception would also like someone to take seriously.