
MOTGuard · In the Bay
Which test for which vehicle
Brakes · 3 min · With Dougie and Eleanor
Listen to this episode
All 40 episodes — choose another
- How this works
- Fog lamps that do not work
- The extra passenger
- Reading the beam
- Before you blame the car
- Headlamp aim
- The LED upgrade
- One lamp, two jobs
- Refuse or decline?
- Stopping a test you started
- Your licence, your name, your record
- Not fit to test today
- The log nobody filled in
- The man reading the notices
- When it goes wrong
- The pads you can't see
- Pipes and hoses
- Cables, rods and levers
- Hydraulics
- Electric parking brakes and four-wheel drive
- Which test for which vehicle
- Tread depth
- Condition, size and type
- Play you can feel
- Compliments to the mechanic
- Ball joints and dust covers
- Anti-roll bars
- Subframes
- Which test applies
- The kit car
- A different engine
- When the book is blank
- Smoke testing
- Before the probe goes in
- The hybrid with a leaking battery
- Hand controls and the road test
- You're done. Now what?
- The quality-control check, including your own
- Calibration, checks and the certificates
- Your risk rating and a site review
Transcript
ELEANOR: The pickup's sales description says lifestyle vehicle. DOUGIE: Its lifestyle appears to involve carrying plasterboard. ELEANOR: The brochure shows a mountain bicycle. Perhaps the plasterboard is training for something. DOUGIE: We establish the vehicle's actual classification. The marketing department doesn't choose the MOT class. ELEANOR: Nor is MOT class the same thing as the M or N category used in the brake-efficiency table. Keep both questions clear. DOUGIE: Our example is constructed to carry passengers and goods. It has four-wheel drive and a known unladen weight of two thousand kilograms. ELEANOR: The testing guide's dual-purpose definition requires that passenger-and-goods construction, an unladen weight not exceeding two thousand and forty kilograms, and either its option A or option B. DOUGIE: Option A allows engine power to be transmitted to all the wheels, either permanently or using the appropriate controls. Our stated vehicle meets that route. ELEANOR: That does not mean every pickup is dual purpose. Option B has its own roof, seating, glazing and dimensional conditions. We check those if we're relying on that route. DOUGIE: There's also a particular test-purpose allowance for certain four-by-four pickups and crew cabs where unladen-weight information isn't available. It isn't an allowance for all missing information. ELEANOR: Over three thousand and up to three thousand five hundred kilograms design gross weight, with the other definition criteria met. Check the actual guidance before applying it. DOUGIE: A large cup holder is not one of the criteria. ELEANOR: Disappointing. It is the only specification the owner knows without checking. DOUGIE: Once we've established class, choose the appropriate test weight. For classes three and four, use the weight shown by the brake-test equipment, or the manual's reliable-source route where necessary. ELEANOR: The procedure distinguishes automated equipment from non-automated rollers. Read the relevant method, rather than lifting a weight from the vehicle next door. DOUGIE: Then select the correct efficiency requirement for the actual vehicle category and first-use conditions. A class-four dual-purpose vehicle is not automatically an M one car. ELEANOR: And classification doesn't settle whether the vehicle is suitable for our rollers. Drive configuration, transmission and braking system still matter. DOUGIE: As we saw last time, a vehicle can need different methods for service and parking brakes. Class, category, weight and method are related questions, not interchangeable answers. ELEANOR: Here's what we do. Establish the classification from the definition and evidence. Identify the correct brake-test basis and method. Apply the relevant requirement. DOUGIE: Then we can discuss its lifestyle. ELEANOR: It has a delivery booked for half past two.